Onko mitään tapaa saada tietokonetta kertomaan omat tekniset tietonsa?

[Guest LEMPPA]

 

Kysymys on otsikossa

 

ja nämä pitäisi saada tietää

-Prosessori ja sen teho(Mhz/Ghz)

-Näytön ohjain

-Rammin koko

-verkkokortti

-ja kaikkea muuta hyödyllistä

[Juha Kalli 24]

http://www.sisoftware.co.uk/ Sandralla onnistuu.

[Juha Huvilinna 0]

Kirjoita tuonne suorita-kenttään "dxdiag" tai käynnistä c:\windows\system32\dxdiag.exe

 

Tuolla saa ainakin jotain selville...

[Mika Kinnunen 0]

Yksi vaihtoehto lisää, Everest Home Edition eli vanhan Aida32:n uusi versio: http://www.lavalys.com/products/overview.php?pid=1〈=en

 

-Mika-

[Ville Elomaa 0]

Kyllähän XP:nkin System Informationistakin saa jollain tasolla noita tietoja, jos muuta ei ole.

 

- Ville -

[Guest Jukkis]

msinfo32.exe

[Guest killjoy]

$ dmesg | less

OpenBSD 3.6 (GENERIC) #136: Fri Sep 17 12:28:10 MDT 2004

    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC

real mem = 535621632 (523068K)

avail mem = 448892928 (438372K)

using 13127 buffers containing 53768192 bytes (52508K) of memory

mainbus0 (root)

cpu0 at mainbus0: (uniprocessor)

cpu0: AMD Athlon 64 Processor 3200+, 2203.13 MHz

cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF

LUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW

cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 1

6-way L2 cache

cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative

cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative

pci0 at mainbus0 bus 0: configuration mode 1

pchb0 at pci0 dev 0 function 0 "VIA K8HTB Host" rev 0x01

ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00

pci1 at ppb0 bus 1

skc0 at pci0 dev 10 function 0 "Marvell SKv2" rev 0x13: irq 11

skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter

sk0 at skc0 port A: address 00:11:2f:95:c2:62

eephy0 at sk0 phy 0: Marvell 88E1000* Gigabit PHY

vga1 at pci0 dev 12 function 0 "S3 ViRGE DX/GX" rev 0x01

wsdisplay0 at vga1: console (80x25, vt100 emulation)

wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

xl0 at pci0 dev 14 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 3, address

00:04:75:d4:a2:18

exphy0 at xl0 phy 24: 3Com internal media interface

pciide0 at pci0 dev 15 function 0 "VIA VT8237 SATA" rev 0x80: DMA

pciide0: using irq 11 for native-PCI interrupt

wd0 at pciide0 channel 0 drive 0: <Maxtor 7Y250M0>

wd0: 16-sector PIO, LBA48, 239372MB, 490234752 sectors

wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5

pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0

configured to compatibility, channel 1 configured to compatibility

wd1 at pciide1 channel 0 drive 0: <IBM-DTLA-305040>

wd1: 16-sector PIO, LBA, 39266MB, 80418240 sectors

wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5

wd2 at pciide1 channel 1 drive 0: <WDC WD2500BB-22DWA0>

wd2: 16-sector PIO, LBA48, 238475MB, 488397168 sectors

wd3 at pciide1 channel 1 drive 1: <Maxtor 5A250J0>

wd3: 16-sector PIO, LBA48, 239372MB, 490234752 sectors

wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5

wd3(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 6

: